最近中文字幕免费完整版_最好看的2018中文中国国语_最好看的MV中文字幕国语电影_最近最新MV字幕免费观看_最好看的2018中文在线观看_√最新版天堂资源网在线_最好看的中文2018_最近最好的2019中文_最近免费中文字幕大全高清MV_最好看的2018免费观看在线_大地资源网最新在线播放

產品中心/ PRODUCTS

我的位置:首頁  >  產品中心  >  涂料檢測設備  >  磨耗儀  >  相控陣探頭【奧林巴斯Olympus】
相控陣探頭【奧林巴斯Olympus】
簡要描述:

相控陣探頭【奧林巴斯Olympus】

  • 產品型號:
  • 廠商性質:經銷商
  • 更新時間:2024-06-03
  • 訪  問  量:7053
在線咨詢

聯系電話:021-56615302

產品詳情

相控陣探頭【奧林巴斯Olympus】
我們制造用于不同檢測應用的各種形狀和尺寸的相控陣探頭。這里用示意圖說明了幾種類型的探頭

相控陣探傷儀探頭【奧林巴斯Olympus】

典型陣列探頭的頻率范圍為1 MHz到17 MHz,晶片的數量范圍為10到128。Olympus提供各種各樣利用壓電復合材料技術的探頭,可進行各種各樣的檢測。本部分說明Olympus的標準相控陣探頭。這些探頭被分為三種類型:角度聲束探頭、整合楔塊探頭及水浸探頭。

其它類型的探頭是根據應用需要而特殊設計的探頭。


 

整合式楔塊和符合規范的探頭

相控陣探傷儀探頭【奧林巴斯Olympus】相控陣探傷儀探頭【奧林巴斯Olympus】

這種組合件將一體化楔塊和符合規范的探頭放置于同一個外殼中,這樣就使探頭和楔塊的組合件具有非常薄的側面,可以用于接觸式角度聲束檢測。由于無需在探頭和楔塊接觸面之間使用耦合劑,因此探頭和楔塊之間的耦合狀態會永遠保持*的狀態。這些探頭可對應力腐蝕裂紋進行手動檢測,還可用于符合AWS和DGS規范的應用,此外,這些探頭還可同時使用40°到70°角度對6.35毫米到19毫米的較厚表面進行手動焊縫檢測(對接接頭、角接接頭、T型接頭)。

    Advantages
  • Probe and wedge in the same housing
  • The lowest-profile probe-and-wedge combination for contact angle beam inspection
  • Coupling always good between probe and wedge interfaces, no need for couplant between the probe and wedge
  • Very small assembly for easy access in restricted areas
  • Inspections of 30° to 70° in steel, SW or LW
  • Easy to handle
  • Probes with an internal wedge can be specially ordered to fit a specific curvature radius.

Typical Applications

  • Manual weld inspection of 6.35 mm to 19 mm (0.25 in. to 0.75 in.) thick surfaces (butt joints, corner joints, tee joints), using 40° to 70° simultaneously
  • Manual inspection of stress-corrosion cracking
  • AWS and DGS code compliant applications

Probe Specifications and Dimensions

Part Number Item Number Frequency
(MHz)
Number of Elements Pitch
(mm)
Active Aperture
(mm)
Elevation
(mm)
Nominal Refracted Beam Angle in Steel Integrated Wedge External Dimensions
mm (in.)
L W H
2L8-DGS1 U8330598 2.0 8 1.0 8.0 9.0 58° SW Yes 27 (1.06) 17 (0.67) 22 (0.87)
4L16-DGS1 U8330597 4.0 16 0.5 8.0 9.0 58° SW Yes 27 (1.06) 17 (0.67) 22 (0.87)
2.25L16-45SW1 U8330014 2.25 16 0.75 12.0 12.0 45° SW Yes 30 (1.18) 15 (0.59) 31 (1.22)
2.25L16-45LW1 U8330495 2.25 16 0.75 12.0 12.0 45° LW Yes 30 (1.18) 15 (0.59) 31 (1.22)
5L16-45SW1 U8330496 5.0 16 0.60 9.6 10.0 45° SW Yes 30 (1.18) 15 (0.59) 31 (1.22)
5L16-45LW1 U8330497 5.0 16 0.60 9.6 10.0 45° LW Yes 30 (1.18) 15 (0.59) 31 (1.22)
2.25L16-AWS1 U8330660 2.25 16 1.0 16.0 16.0 N/A No 25 (0.98) 38 (1.50) 18 (0.71)
These probes come standard with an OmniScan® connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths

 

深穿透型探頭

相控陣探傷儀探頭【奧林巴斯Olympus】

深穿透探頭可與各種楔塊配合使用,進行各種角度聲束的檢測應用。這些探頭于深穿透應用,如對較厚平板、焊縫、鍛件,及多噪聲或晶粒狀材料的檢測。

    Advantages
  • Wave layers with acoustic adaptation to Rexolite®
  • Captive anchoring screws are provided with the probe.
  • A wide selection of wedges is available to suit any angle beam application.

Typical applications

A3, A4, and A5 probes
Deep penetration applications

  • Thick plates and welds
  • Forging
  • Noisy or granular material

相控陣探傷儀探頭【奧林巴斯Olympus】

Probe specifications and dimensions

Part number Frequency
(MHz)
Number of elements Pitch
(mm)
Active
Aperture (mm)
Elevation(mm) External dimensions
mm (in.)
L W H
3.5L16-A3 3.5 16 1.60 25.6 16.0 36 (1.41) 36 (1.41) 25 (0.98)
5L16-A3 5.0 16 1.20 19.2 12.0 36 (1.41) 36 (1.41) 25 (0.98)
1.5L16-A4 1.5 16 2.80 44.8 26.0 57 (2.25) 46 (1.80) 30 (1.19)
2.25L16-A4 2.25 16 2.00 32.0 20.0 57 (2.25) 46 (1.80) 30 (1.19)
2.25L32-A5 2.25 32 0.75 24.0 24.0 29 (1.15) 43 (1.67) 24 (0.96)
5L32-A5 5.0 32 0.60 19.2 20.0 29 (1.15) 43 (1.67) 24 (0.96)

These probes come standard with an OmniScan® connector and a 2.5?m (8.2?ft) cable or can be specially fitted with other connectors and cable lengths.

 

焊縫檢測探頭

相控陣探傷儀探頭【奧林巴斯Olympus】

焊縫檢測探頭的外殼側面很薄且線纜從前面伸出的特點可以避免受到掃查器探頭架的干擾。這些探頭不僅適用于對厚焊縫進行的手動和自動檢測,還適用于對鑄鐵、鍛件、管道、管件、***加工部件和結構部件中的裂縫和焊接缺陷的檢測。

    Advantages
  • Low-profile housing
  • Front-exit cable to avoid interference with the scanner probe holder
  • Fits special PipeWIZARD® wedges designed for automated inspections of girth welds (sophisticated irrigation channels, locking carbide wear pins)
  • Can be ordered with CE-certified Hypertronics connector
  • Suitable for manual and automated inspections
  • Available laterally focused probes improve defect length sizing (7.5CCEV100-60-A16)

Typical applications

  • Automated inspection of girth welds with PipeWIZARD systems
  • Manual or automated inspection of thick welds
  • Detection of flaws and sizing
  • Inspection of castings, forgings, pipes, tubes, and machined and structural components for cracks and welding defects

相控陣探傷儀探頭【奧林巴斯Olympus】

Probe specifications and dimensions

Part number Frequency
(MHz)
Number of elements Pitch
(mm)
Active
Aperture (mm)
Elevation
(mm)
External Dimensions
mm (in.)
L W H
5L60-PWZ1 5.0 60 1.0 60.0 10.0 68 (2.68) 26 (1.02) 30 (1.18)
7.5L60-PWZ1 7.5 60 1.0 60.0 10.0 68 (2.68) 26 (1.02) 30 (1.18)
7.5L60-PWZ1* 7.5 60 1.0 60.0 10.0 68 (2.68) 26 (1.02) 30 (1.18)
5L48-PWZ2 5.0 48 1.0 48.0 10.0 56 (2.20) 26 (1.02) 30 (1.18)
5L32-PWZ3 5.0 32 1.0 32.0 10.0 40 (1.57) 26 (1.02) 30 (1.18)
7.5L32-PWZ3 7.5 32 1.0 32.0 10.0 40 (1.57) 26 (1.02) 30 (1.18)
10L32-PWZ3 10.0 32 1.0 32.0 10.0 40 (1.57) 26 (1.02) 30 (1.18)
7.5CCEV100-60-A16 7.5 60 1.0 60.0 18.0 68 (2.68) 29 (1.14) 30 (1.18)
7.5CCEV100-60-A16** 7.5 60 1.0 60.0 18.0 68 (2.68) 29 (1.14) 30 (1.18)
These probes come standard with an OmniScan® connector and a 2.5?m (8.2?ft) cable or can be specially fitted with other connectors and cable lengths.

 

近壁探頭

相控陣探傷儀探頭【奧林巴斯Olympus】

近壁探頭的兩端具有較短的盲區(*晶片的中心和zui后晶片的中心到與它們zui近的探頭外殼邊緣的距離是1.5毫米)。 它們可以*地適用于復合材料的通道檢測,并用于復合材料的C掃描檢測(分層、脫膠和多孔性)。

Advantages

  • Shortened dead zone at both ends (1.5 mm between center of first or last element and housing edge)
  • Well suited for composite channel inspections
  • Used for C-scan inspections of composites (delamination, disbonding, and porosity)

Probe Specifications and Dimensions

Part Number Item Number Frequency
(MHz)
Number of Elements Pitch
(mm)
Active Aperture
(mm)
Elevation
(mm)
External Dimensions mm (in.)
L W H
3.5L64-NW1 U8330148 3.5 64 1.0 64.0 7.0 66 (2.60) 19 (0.75) 25 (0.98)
5L64-NW1 U8330134 5.0 64 1.0 64.0 7.0 66 (2.60) 19 (0.75) 25 (0.98)
3.5L24-NW2 U8330965 3.5 24 1.0 24.0 7.0 26 (1.02) 19 (0.75) 30 (1.18)
5L24-NW2 U8330155 5.0 24 1.0 24.0 7.0 26 (1.02) 19 (0.75) 30 (1.18)
3.5L128-NW3 U8330695 3.5 128 1.0 128.0 7.0 130 (5.12) 21 (0.83) 35 (1.38)
5L128-NW3 U8330647 5.0 128 1.0 128.0 7.0 130 (5.12) 21 (0.83) 35 (1.38)
These probes come standard with an OmniScan® connector and a 2.5 m (8.2 ft) cable or can be specially fitted with other connectors and cable lengths.


 

通用型探頭

相控陣探傷儀探頭【奧林巴斯Olympus】

用途廣泛的各種探頭與楔塊組合在一起的側面極薄,可以較為容易地進到空間狹小的區域。這些探頭可以和多種楔塊一起使用,進行各種角度聲束檢測應用。這些探頭不僅用于對6.35毫米到38毫米的較厚焊縫進行手動或自動檢測,還可對鑄鐵、鍛件、管道、管件、***加工部件及結構部件的裂縫和焊縫缺陷進行檢測。


 

Probe Specifications and Dimensions

 

Part Number Item Number Frequency
(MHz)
Number of Elements Pitch
(mm)
Active Aperture
(mm)
Elevation
(mm)
External Dimensions
mm (in.)
L W H
5L16-A10 U8330595 5.0 16 0.60 9.6 10.0 23 (0.91) 16 (0.63) 20 (0.79)
10L32-A10 U8330251 10.0 32 0.31 9.9 7.0 23 (0.91) 16 (0.63) 20 (0.79)
5L32-A11 U8330274 5.0 32 0.60 19.2 10.0 25 (0.98) 23 (0.91) 20 (0.79)
5L64-A12 U8330593 5.0 64 0.60 38.4 10.0 45 (1.77) 23 (0.91) 20 (0.79)
5L60-A14 U8330785 5.0 60 1.0 60.0 10.0 68 (2.68) 23 (0.91) 20 (0.79)
7.5L60-A14 U8330804 7.5 60 1.0 60.0 10.0 68 (2.68) 23 (0.91) 20 (0.79

線性陣列探頭是工業應用中zui常用的相控陣探頭。定義相控陣探頭的一個重要因素是探頭的激活孔徑。

小腳印探頭

相控陣探傷儀探頭【奧林巴斯Olympus】

小腳印探頭可進入到活動空間狹窄的區域(A00探頭的腳印尺寸為8×8毫米)。

    Advantages
  • Access to confined areas (A00 probe has an 8 × 8 mm footprint)
  • Cable connector can come out from either the side or the top
    (A0 only).
  • Special-design small-footprint wedge
  • 10L16-A00 is used for aerospace scribe-mark applications.

Probe Specifications and Dimensions

Part Number Item Number Frequency
(MHz)
Number of Elements Pitch
(mm)
Active Aperture
(mm)
Elevation
(mm)
External Dimensions mm (in.)
L W H
5L10-A0-SIDE U8330080 5.0 10 0.60 6.0 6.0 13 (0.51) 10 (0.39) 23 (0.91)
5L10-A0-TOP U8330075 5.0 10 0.60 6.0 6.0 13 (0.51) 10 (0.39) 23 (0.91)
10L10-A0-SIDE U8330110 10.0 10 0.60 6.0 6.0 13 (0.51) 10 (0.39) 23 (0.91)
10L10-A0-TOP U8330111 10.0 10 0.60 6.0 6.0 13 (0.51) 10 (0.39) 23 (0.91)
7.5CCEV35-A15 U8330826 7.5 16 0.50 8.0
在線咨詢

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯數字),如:三加四=7

掃碼加微信

TEL:13585869092

掃碼加微信

欧美黄色精品| 人妻少妇av中文字幕乱码牛牛| 三级黄色A片| 亚洲激情图片区| 亚洲黄色在线| 日韩无码人妻| 高清无码小视频| 国产尤物在线视频| 国产成人精品999在线观看| 二区无码| 在线观看日韩一区二区| 日韩激情图片| 久久久久久影院| 亚洲日本VA中文字幕| 亚洲午夜精品久久久久久白云| 亚洲a网站| 久久视频成人黄色| 午夜毛片在线| 成人日韩欧美| 国产有码| 国产三级片在线观看| 色欲AV无码精品一区二区久久| 无码中文人妻| 综合五月婷婷| 国产精品久久久久久日| 午夜免费网站| av综合久久| 无码人妻久久中文一区二区| 成人女同av在线观看| 青青青操| 91精品国产一区二区三区蜜臀| 日韩午夜在线观看| 亚洲无码六区| 亚洲高清一区二区三区四区电影| 黄色国产在线| 精品久久久999| 国产二区三区四区| 亚洲色情偷拍自拍| 日韩精品一区二区免费| 九九久久精品| 亚洲人成电影网|